CAD Construct LLC logo
GET IN TOUCH

3D Laser Scanning Cost Estimator

Connecting your building to a price range in seconds

Enter building type, size, and deliverable to get a typical Western Pennsylvania price range in seconds.

Scroll to the estimator

What Drives Scanning Cost

Where square footage meets accuracy and deliverable

Square footage sets the base. Levels, accuracy target, and deliverable type move the number up or down.

Is scanning worth it?

Typical Ranges by Building Type

Ranges that carry straight into our quotes

Warehouses run lowest per square foot, industrial and historic interiors highest. The estimator uses the same ranges we quote from.

How long does a scan take?

Estimate Now, Exact Quote Later

Crossing from ballpark to scoped quote in a business day

The calculator is a ballpark. Send a floor plan or address and we scope it precisely, usually within one business day.

Request an exact quote

Pricing Across All Services

One page spanning every service

Compare scanning, as-built, Scan-to-BIM, and virtual tour packages on one page.

See pricing

3D Laser Scanning Cost Calculator

Last updated:

3D Laser Scanning Cost Estimator

Instant ballpark for scanning, as-builts, scan-to-BIM & virtual tours in Pittsburgh & Western PA

What Drives Your 3D Laser Scanning CostThe five inputs the estimator asks for
  1. Building / space typeOpen-span warehouse scans fastest; MEP-dense industrial and ornate historic spaces need far more scan positions for the same square footage.
  2. Approximate sizeSquare footage sets the base of the estimate — pricing is calculated per square foot, so size is the largest single lever.
  3. Floors / levelsEach additional level adds control and registration work to tie the floors together — roughly 6% for two levels, 12% for three or more.
  4. Primary deliverableA registered point cloud is the base. 2D CAD, a Revit model, a virtual tour, or a full digital twin each add processing on top.
  5. Accuracy target (USIBD LOA)LOA 20 is the baseline; LOA 30 adds about 15% and LOA 40 about 35%, because tighter tolerances need denser scans and more control.
CAD Construct LLC3D Laser Scanning & Reality CapturePittsburgh, PAcadconstructllc.com

Estimated project range
$3,450 – $6,900
≈ $0.35 – $0.69 / sq ft
Field capture1–2 days
Deliverable turnaround1–2 weeks
AccuracyLOA 30 (±6 mm)

Get an exact quote →

Estimate only — not a quote. Ranges reflect typical Western PA commercial projects and depend on site access, occupancy, clutter, control requirements, and scan density. For a fixed price, send us a floor plan or address and we’ll scope it precisely.

CAD Construct LLC  ·  3D Laser Scanning & As-Built Documentation  ·  cadconstructllc.com

Free tools & templates

Typical Cost RangesBase scanning rate per square foot, before deliverable and accuracy
  • $0.16–0.28Warehouse / open span, per sq ft
  • $0.28–0.45Office / commercial, per sq ft
  • $0.24–0.40Retail / restaurant, per sq ft
  • $0.45–0.90Industrial / MEP-dense and historic / ornate, per sq ft
Estimate only — not a quote. Ranges reflect typical Western PA commercial projects and depend on site access, occupancy and clutter.
CAD Construct LLC3D Laser Scanning & Reality CapturePittsburgh, PAcadconstructllc.com
Basic vs. Detailed ScopeWhat moves an estimate from the low end to the high end
Basic scope
  • Open-span space — warehouse or simple office
  • Registered point cloud only, no modeling
  • LOA 20 (±15 mm) — baseline multiplier
  • Single floor, minimal control work
  • Typical turnaround: 3–5 business days
Detailed scope
  • MEP-dense industrial or ornate historic space
  • Digital twin — BIM plus tour plus data
  • LOA 40 (±3 mm) — about 35% above baseline
  • Three or more levels tied together
  • Typical turnaround: 3–7 weeks
CAD Construct LLC3D Laser Scanning & Reality CapturePittsburgh, PAcadconstructllc.com
What's IncludedDeliverable options and typical turnaround
  • Registered point cloudE57/RCP deliverable — the base of every project. Typically 3–5 business days.
  • 2D as-built CADPlans and elevations drafted from the cloud. Typically 1–3 weeks depending on size.
  • Scan-to-BIMNative Revit model built from the point cloud. Typically 2–6 weeks depending on size.
  • 3D virtual tourNavigable Matterport or 360 tour of the scanned space. Typically 3–7 business days.
  • Digital twinBIM plus tour plus data in one package. Typically 3–7 weeks depending on size.
CAD Construct LLC3D Laser Scanning & Reality CapturePittsburgh, PAcadconstructllc.com
How the Estimate WorksFrom your five inputs to a fixed quote
  1. Your inputsSpace type, square footage, levels, deliverable and accuracy target.
  2. Base rateA per-square-foot range is selected from the space type and applied to your size.
  3. MultipliersDeliverable add-ons, level count and LOA target adjust the range.
  4. Exact quoteSend a floor plan or book a site walk and we replace the range with a fixed quote.
The calculator returns a range, not a quote — site access, occupancy and clutter are only assessable on a real plan or walk-through.
CAD Construct LLC3D Laser Scanning & Reality CapturePittsburgh, PAcadconstructllc.com

Software and equipment mentioned on this page
We aren't affiliated with or sponsored by any of the companies listed here, but we're always looking to work closely with the companies whose tools we recommend.
  • Matterport logo
  • Autodesk Revit logo